saronix crystal clock oscillator s1613 / s1615 series technical data 3.3 & 5v, hcmos, ttl, smd ds-196 rev b01 141 jefferson drive ? menlo park, ca 94025 usa 650-470-7700 800-227-8974 fax 650-462-9894 saronix frequency range: frequency stability: 25, 50 or 100ppm over all conditions; calibration tolerance, operating temperature, input voltage change, load change, aging (1 year @ 25c average ambient operating temperature), shock and vibration. 1.5 mhz to 50 mhz or 80 mhz to 125 mhz = s1613 1.5 mhz to 67 mhz = s1615 temperature range: operating: storage: supply voltage: 0 to +70c, -40 to +85c available, see part number builder -55 to +125c 5v 10% or 3.3v 10% supply current: s1613: s1615: description the 5v s1615 and 3.3v s1613 are crys- tal-controlled, low-current oscillators pro- viding precise rise and fall times to drive high performance applications. the sub- miniature, low profile leadless ceramic package has gold-plated contact pads, ideal for today's pick-and-place smt en- vironments. these oscillators are avail- able to 125 mhz. actual size output: symmetry: rise & fall times: logic 0: logic 1: load s1613: load s1615: period jitter rms: 40/60% max @ 50% v dd or 1.4v 45/55% max at 106.2500 mhz and 125.0000 mhz 10ns max to 50mhz, 20% to 80% v dd (s1613) 3ns max from 80+mhz, 20% to 80% v dd (s1613) 6ns max 20% to 80% v dd (s1615) 5ns max 0.4 to 2.4v (s1615) 10% v dd max or 0.4v max 90% v dd min or 2.4v min 30pf, 15pf 80+ mhz 50pf to 50 mhz, 30pf or 5ttl from 50+ to 67 mhz 5ps max applications & features sub-miniature, 1.9mm high ceramic package ideal for smt applications 3.3 and 5v versions tri-state cmos, hcmos & ttl compatible frequency range covers 106.25 mhz fibre channel and 125 mhz gigabit ethernet applications perfect for pcs; notebook, palmtop computers; portable applications; pcmcia cards anywhere small size, low power, sur- face mountability are a priority available on tape & reel; 16mm tape, 500pcs per reel solder reflow guide reflow 240 max preheat 183 10c 4c/sec max temperature ? c 4c/sec max 1 ? 2 minutes 10 sec max time 150 200 250 cooling part numbering guide mechanical: shock: solderability: vibration: solvent resistance: terminal strength: resitance to soldering heat: mil-std-883, method 2002, condition b mil-std-883, method 2003 mil-std-883, method 2007, condition a mil-std-202, method 215 mil-std-202, method 211, conditions a & c mil-std-202, method 210, condition i or j environmental: gross leak test: fine leak test: thermal shock: moisture resistance: mil-std-883, method 1014, condition c mil-std-883, method 1014, condition a2 mil-std-883, method 1011, condition a mil-std-883, method 1004 series s1613 = 3.3v, 1.5 to 50 or 80 to 125 mhz s1615 = 5.0v, 1.5 to 67 mhz s 1615 c ? 50.0000 (t) saronix frequency (mhz) stability tolerance a = 25ppm, 0 to +70c b = 50ppm, 0 to +70c c = 100ppm, 0 to +70c e = 50ppm, -40 to +85c, 67 mhz max (above 67 mhz consult saronix) f = 100ppm, -40 to +85c, 67 mhz max (above 67 mhz consult saronix) 15ma max 1.5 to 25 mhz 25ma max 25+ to 50 mhz 30ma max 80+ to 125 mhz 20ma max 1.5 to 25 mhz 50ma max 25+ to 67 mhz (t) = tape & reel full reel increments only new product
all specifications are subject to change without notice. saronix crystal clock oscillator technical data s1613 / s1615 series 141 jefferson drive ? menlo park, ca 94025 usa 650-470-7700 800-227-8974 fax 650-462-9894 saronix 3.3 & 5v, hcmos, ttl, smd ds-196 rev b01 package details test circuits output waveform ma m power supply v m v cc oscillator pad 3 pad 2 .01 f out gnd c l = s1613: 30pf, 15pf 80+ mhz s1615: 50pf to 50 mhz 30pf 50+ to 67 mhz (note a) tri-state input 5.08 .200 7.2 .284 pad 1 oe 1.9 .074 max 1.40 .055 1.10 .043 recommended land pattern pad 4 pad 1 2.4 vdc 1.4 vdc 0.4 vdc t f t f t r t r cmos ttl symmetry symmetry gnd v dd logic 0 20% v dd 50% v dd 80% v dd logic 1 scale: none ( dimensions in ) mm inches s j c yyww marking format * 5.2 .205 pad 2 gnd pad 4 v dd pad 3 output * exact location of items may vary date code max max 2.6 .102 frequency saronix stability tolerance j = s1613 k = s1615 test point 1.8 .071 2.0 .079 4.2 .165 5.08 .200 ** external high frequency power supply decoupling required. ** 12 43 note a: c l includes probe and jig capacitance. denotes pad 1 tri-state logic table pad 1: input logic 1 or nc logic 0 or gnd pad 3: output oscillation high impedance required input levels on pin 1: logic 1 = 2.2v min logic 0 = 0.8v max tol: 0.13mm new product
|
